Dwarf hang with looper .x 3


Using this pedal board shaggy 3 loop 1 - MOD Devices the Dwarf hung after recording a single track on the first looper and trying to record a second track on the second looper. Here is a video of the Dwarf being hung: Dwarf freeze - YouTube . It has happened a couple of times, the first I had 5 or 6 loops running on all 3 loopers, one or two on each, and I was trying to switch between switch banks. The second time, as you see here, I had just one loop running on the first bank and I was in the process of changing routes when it hung. CPU usage was around 25%, I don’t know what RAM was like.

How to reproduce

  1. Use the pedal board and it might hang, although it might not - I’ve used it many times with no hang.

Expected/suggested solution

Either knowing what causes the issue so I can avoid it, or sorting so it doesn’t happen!

Additional information

Open the controller menu (hold left knob down), navigate to Info > Versions and write down here the versions.

  • release: V1.10.1.2234
  • controller: MDW01P01-00059

Also provide some information about your system if possible.

  • Windows
  • Windows 10, MS Edge.