Would it be possible to have an option to sum the headphone output so that the left and right output appear equally in both headphone sides.
I am running 2 separate instrument signals from the Chapman Stick and it would be nice to not have each side going to it’s respective side of the stereo field but equally in both sides.
Also I could use each output for their own path and the headphone output into a preamp to have a mono signal of both.
Just a thought.
Keep up the good work Mod Devices.
I also noticed in one of my first out-of-box tests that with headphones on the output with one instrument plugged in was all directed to one of the headphone speakers. It felt a little awkward to me, being used to a couple other multi-effects pedals where headphone output receives a stereo mix.
You can connect the mono output of your signal path to both outputs of the MOD. That will give you the same output on both channels. Or is that no what you’re looking for?
That’s probably it - I might have been demoing a pedalboard with only one output connected, will try again next time.
Does it make sense as a future ‘nice to have’ feature something like the ability to enable a warning on one of the Duo screens if headphones are connected and only one output is connected? (and/or option to automatically make the stereo connection if possible for headphones)
I’d like that, too. Ideally as option in the someday to-be-developed settings menu (something like “use both outputs even if only one output is connected”).
I created a New Pedalboard, which currently contains only the default stereo gain connected to both inputs and outputs. With headphones plugged in, I only hear sound in one ear.
With my guitar plugged into Input 1, is there a way to receive stereo output into the headphones?
that sounds like a hardware problem if you have audio going to output 2 but it doesn’t come through the headphones. Does the level indicator LED glow when audio is going though output 2?
@bulevardi if I remember correctly, my problem was due to having one of the outputs set to a different (much lower) level. Check the output levels in settings and confirm they are identical
Ok, will check later on.
I’m not directly going to use it with the headphones directly in the modduo, but I was doing my first try-out and had some weird feeling about it.
If I connect the output of the modduo to another USB interface (Behringer link cable) to the computer, as an input in my DAW (Reaper), I have my headphones in stereo.
I plug the headphone in the Behringer device and it’s stereo, as Reaper gives a stereo output.
That will be my main setting, as I’ll be using it as home recording device straight into the computer.
Cheers for that… looking forward to v1.5!