Pedalboard doesn't save footswitch extender assigments


I assign some effect to a footswitch on the Footswitch Extender, save the pedalboard, and it works well, until MOD is turned off. When I turn it on again and load the pedalboard, the effects assigned to the extender doesn’t work.

How to reproduce

  1. Assign any effect to a footswitch on the Footswitch extender.
  2. Save the pedalboard.
  3. Turn MOD off and on again.

Expected/suggested solution

I would like to have the assignments saved when I turn on the device

Additional information

Open the controller menu (hold left knob down), navigate to Info > Versions and write down here the versions.

  • release: v1.4.0
  • controller: e0778f4

Also provide some information about your system if possible.

  • Operating system: Ubuntu 16.10

Thanks for the report
I need to know which exact RC of 1.4 you’re using.

I think the assignments are saved, but not being loaded for some reason.
Do you have the footswitch connected at the moment you turn the MOD on?
If you load the pedalboard again via web interface, after boot, does it load the assignments correctly?

Hello @Vauto
This should to be working fine from v1.5. Can you please update your Duo and confirm the issue is solved?


See also Footswitch assignments lost after disconnection