Pedalboard Snapshots - Display doesn't show current snapname when changed via MIDI or WebGui

Description


When having assigned the Snapshots to a Knob or Footswitch at the Mod, the display doesn’t show the current snapshot, if it was changed via MIDI Program Change or via the WebGui.

How to reproduce


  1. Create some peadalboard snapshots
  2. Assign the Load/Manage to Knob or Footswitch
  3. Check that the snapshots work (best by using different sounds)
  4. Load those snapshots via external MIDI Program Change messages.

Expected/suggested solution


Display should show the active Snapshot also when loaded via MIDI

Additional information


Open the controller menu (hold left knob down), navigate to Info > Versions and write down here the versions.

  • release: V1.8.5
  • controller: 2A34C73

Hello, I can confirm that the display is not updating snapshots when changed via MIDI Program Change or via the WebGui. Will file this; Thanks for your feedback.

Thanks Sava!