OUTPUT 1. Volume issue

Contribute Bug Reports
#1

Description

If you go into output volume for output1 on the unit and turn down then back up, I lose all volume.

How to reproduce

  1. Turn unit on.
  2. Press and Hold knob 1 to get main menu.
  3. Select Volume and Gains > Output 1
  4. Roll down the volume to -50. Then turn back up to 0
    On my unit the volume keeps going down and eventually cuts out or stays very very low.

Expected/suggested solution

Should have gone back up to full volume.

Additional information

Open the controller menu (hold left knob down), navigate to Info > Versions and write down here the versions.

  • release: 1.3.0
  • controller: e582b18

Also provide some information about your system if possible.

  • Operating system: MAC
  • System version: 10.11.6
#2

I just tried this on a pedalboard with just a gain plugin and it does not do it…
I did notice that the actual change in volume was lagging… after turning the knob down the volume was still going down and when I turned it up it took a little time for it to catch up.

The issue was happening with a very involved pedalboard. Can’t share because it has unstable plugins…

#3

Restarting the unit resolves the issue.

#4